EX-02 — Fiber Cement Board

tepePAN®

Smooth multipurpose board

Reaction to fire — EN 13501-1: A1
Thickness range: 6–20mm
Density ± 75: 1150kg/m³

01 — Overview

tepePAN® is a multipurpose flat building board of cement and cellulose fibre with A1 reaction to fire. Its natural cream tone comes from its raw materials, and it is available with a smooth face or with calibrated Flat and fine Line sanded surfaces.

It offers architectural and structural solutions from base to roof: ventilated facades, wall and roof sheathing, partition, shaft and fire walls, floors and mezzanines, ceilings, and tile backing in wet spaces. It is more impact-resistant than gypsum-based boards and takes paint, coatings or wallpaper.

A minimum thickness of 10 mm is required for exterior use, except in prefabricated buildings; thinner boards used outside are excluded from warranty.

Performance

01
Flat & Line sanded
Smooth, calibrated Flat or fine Line sanded surfaces.
02
Foundation to roof
Facade, wall, floor, ceiling and roof sheathing applications.
03
Backer board
Substrate for interior and exterior cladding and for tiles in wet spaces.
04
Impact resistant
Higher impact resistance than gypsum-based boards.
05
A1 non-combustible
Suitable for fire walls and lift-shaft walls.
06
Weather resistant
Resists seasonal change, sunlight, water, moisture and impact.
07
Healthy material
Asbestos-free and odourless. Will not rot, mould or attract insects.
08
Easy to work
Light to carry, easy to cut, drill, install and modify.